Mechanical Interlock Transfer Window

As one of the most professional Mechanical Interlock Transfer Window manufacturers and suppliers in China, we're featured by high quality customized products made in China. If you're going to buy Clean transfer window, welcome to get quotation from our factory.

Send Inquiry

Product Description

Mechanical Interlock Transfer Window manufacturers

Mechanical Interlock Transfer Window suppliers


Mechanical Interlock Transfer Window


1. The Introduction of The Mechanical Interlock Transfer Window


The Mechanical Interlock Transfer Window is a kind of auxiliary equipment for the quick-installed modular clean room, which is mainly used for the transfer of small items between the clean area and the non-clean area, and between the clean area and the clean area, so as to reduce the opening of the quick-installed modular clean room. The number of times, maintain the positive pressure in the quick-install modular clean room, and minimize the pollution to the quick-install modular clean room


Mechanical Interlock Transfer Window


2. There Are Three Types of Mechanical Interlock Transfer Window


1). Electronic chain transfer window

2). Mechanical interlock transfer window

3). Self-cleaning transfer window


According to the working principle, the transfer window can be divided into air shower transfer window, ordinary transfer window and laminar flow transfer window. Various types of transfer windows can be made according to actual requirements.


Optional accessories: Interphone, germicidal lamp and other related functional accessories.


3. The Parameter of The Mechanical Interlock Transfer Window


Model Name

Transfer Window

Transfer Window

Air Shower Transfer Window

Dimensions W*D*H(mm)




Internal dimensions W*D*H( mm)




Box material

The outer wall of the box is made of cold-rolled sheet/stainless steel, the surface is electrostatically sprayed, warm light white, and the inner wall is made of stainless steel.


Half-glazed windows and doors, mechanically interlocked




High efficiency filter (efficiency=99.99%)

Power Consumption(Kw)



4. The Product Details of The Mechanical Interlock Transfer Window


Mechanical Interlock Transfer Window

5. The Working Principle of The Mechanical Interlock Transfer Window


1). Mechanical interlocking device: The internal use of mechanical form to achieve interlocking, when one door is opened, the other door cannot be opened, and the other door must be closed before the other door can be opened.


2). Electronic interlocking device: the internal use of integrated circuits, electromagnetic locks, control panels, indicator lights, etc. to achieve interlocking, when one door is opened, the door indicator light of the other door does not light up, indicating that the door cannot be opened, At the same time, the electromagnetic lock action realizes interlocking. When the door is closed, the electromagnetic lock of the other door starts to work, and the indicator light will light up, indicating that the other door can be opened.


6. The Feature of The Mechanical Interlock Transfer Window


1). The box body is made of high-quality electrolytic board, and the surface is treated with baking paint

2). The work surface is made of stainless steel, smooth and clean

3). The doors on both sides are mechanically or electronically interlocked to ensure that they cannot be opened at the same time

4). Professional and fast design, support customization


Clean Transfer Window


7. The Use of The Mechanical Interlock Transfer Window


The Mechanical Interlock Transfer Window is managed according to the cleanliness level of the higher-level clean area connected to it. For example, the transfer window connected between the coding room and the filling room should be managed according to the requirements of the filling room. After get off work, the operator in the clean area is responsible for wiping the internal surfaces of the transfer window clean, and turning on the ultraviolet sterilization lamp for 30 minutes.


1). The material entering and leaving the clean area must be strictly separated from the flow channel, and the material enters and exits through the special channel of the production workshop.


2) When the materials enter, the raw and auxiliary materials will be unpacked by the person in charge of the preparation class or the surface will be cleaned, and then sent to the temporary storage room of raw materials and auxiliary materials in the workshop through the transfer window; , and sent to the in-package room through the transfer window. The workshop integrator handles the material handover with the person in charge of the preparation and internal packaging processes.


3). When passing through the transfer window, the regulations of “one opening and one closing” for the inner and outer doors of the transfer window must be strictly implemented, and the two doors cannot be opened at the same time. Open the outer door and put the material in, then close the door first, then open the inner door to take out the material, close the door, and so on.


4). When the material in the clean area is sent out, the material should be transported to the relevant material intermediate station first, and the material should be moved out of the clean area according to the reverse procedure when the material entered.


5). All semi-finished products shipped from the clean area must be sent from the transfer window to the outer temporary storage room, and then transferred to the outer packaging room through the logistics channel.


6). Materials and wastes that are very likely to cause pollution should be transported from their dedicated transfer windows to non-clean areas.


7). After the material is in and out, the site of each clearing room or intermediate station and the sanitation of the transfer window should be cleaned up in time, the inner and outer access doors of the transfer window should be closed, and the cleaning and disinfection work should be done well.

Mechanical Interlock Transfer Window


8. The Installation of The Mechanical Interlock Transfer Window


Choose a convenient location on the wall, and then open the hole. The hole is generally about 10MM larger than the outer diameter of the transmission window. Put the transmission window into the wall, generally install it in the middle of the wall, keep it balanced and fixed, and decorate it with rounded corners or other decorative strips. The gap between the transmission window and the wall can be sealed and decorated with glue.


Mechanical Interlock Transfer Window


9. The Application of The Mechanical Interlock Transfer Window


Mechanical Interlock Transfer Window


10. The Purchase Notes of The Mechanical Interlock Transfer Window


▲Invoice description

The price of this shop does not include tax points, and additional tax points are required for billing. For details, please consult customer service.


▲ Shipping Instructions

The goods in this store are all large-volume goods, and the freight varies greatly in different regions. The goods do not include freight and wooden frame packaging costs. The actual freight is calculated according to the product volume, quantity, wooden frame (export wooden box) packaging, and delivery address. Before shooting, you must contact customer service to calculate the freight! In order to avoid unnecessary misunderstandings, directly photographed and not shipped, need to make up the freight and wooden packaging costs before delivery.


▲Signing instructions

In order to protect your purchase rights and provide you with high-quality services, you need to be the logistics personnel when you sign for the package. Help you to solve the problem properly and quickly (if there is no inspection and receipt, the store will not be responsible for any damage, small pieces and other reasons to return).


Mechanical Interlock Transfer Window


11. The Introduction of The Dong Guan Zhuo Wei Air Purification Technology Co., Ltd.


Zhuo Wei Air Purification factory is one of the leading brands Clean Transfer Window Manufacturers, suppliers, made in China, Products have been exported to more than 30 countries and regions all over the world. wholesale customized low price High Quality Clean Transfer Window for your production line Get more details of advanced latest selling Clean Transfer Window from Zhuo Wei Air Purification factory and contact us to get a price quotation. Our product quality has passed international certification, and the price is affordable, newest, easy-maintainable. We also provide a product price list, please contact us to learn more. Welcome to call and order our products wholesale.



12. FAQ:


Q1: What is you minimum order quantities?

A :Our MOQ is one set which can meet your sample requirement.


Q2: What is your leading time.

A :It’s based on your quantities and the sizes of the products.Generally it takes us 20 days for one container and 10 days for sample orders.


Q3: What is your payment terms?

A :30% by T/T as deposit, balance will be payed before delivery.


Q4: Do you accept OEM&ODM?

A: Yes


Q5: Why maxi?

1). 2 years warranty time guarantee

2). 24 hours to give you prompt and further information

3). Send invitation and arrange everything for you when you come to China.


Mechanical Interlock Transfer Window Made in China

China Mechanical Interlock Transfer Window manufacturers

Send Inquiry

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Verify Code