FFU high-efficiency air outlet

As one of the most professional FFU high-efficiency air outlet manufacturers and suppliers in China, we're featured by high quality customized products made in China. If you're going to buy FFU high-efficiency air outlet, welcome to get quotation from our factory.

Send Inquiry

Product Description

China FFU high-efficiency air outlet suppliers

China FFU high-efficiency air outlet manufacturers

 

1. The Introduction of The FFU High-efficiency Air Outlet

 

The high-efficiency air outlet is an ideal terminal filtration device for 1000-level, 10,000-level and 100,000-level purification air conditioning systems, and can be widely used in purification air conditioning systems in medicine, health, electronics, chemical and other industries. The high-efficiency air outlet is used as the terminal filtration device for the renovation and new construction of 1000-300000 clean rooms at all levels, and it is the key equipment to meet the purification requirements. The high-efficiency air outlet includes a static pressure box, a diffuser plate, and a high-efficiency filter. The interface with the air duct can be top-connected or side-connected.


FFU high-efficiency air outlet

 

1). The high-efficiency air outlet is a thousand-level, ten-thousand-level, and one-hundred-thousand-level, which is an ideal terminal filter device for purifying the air conditioning system.

2). It can be widely used in purification air-conditioning system in medicine, electronics, chemical industry and other industries.

3). The high-efficiency air outlet is used as a terminal filtration device for the renovation and new construction of 1000-300000-level clean rooms at all levels, and is the key equipment to meet the purification requirements.

The high-efficiency air outlet includes a static pressure box, a diffuser plate, and a high-efficiency filter. The interface with the air duct can be top-connected or side-connected.

 

2. The Parameters of The FFU High-efficiency Air Outlet

 

FFU high-efficiency air outlet

 

FFU high-efficiency air outlet

 

FFU high-efficiency air outlet

 

3. The Features of The FFU High-efficiency Air Outlet

 

◆The box is made of cold-rolled steel plate

◆Surface electrostatic spray

◆Nice appearance, compact structure, easy to install and maintain

◆The diffuser panel on the air outlet is made of aluminum spray, cold-rolled steel spray or stainless steel

 

There are two types of high-efficiency air outlets: Ⅰ and Ⅱ. Series I is in the form of a replaceable filter, and series II is in the form of a one-time air outlet, both of which are downward air supply.

 

High-efficiency air outlet series I: This air outlet is composed of high-efficiency filter, thin steel plate, aluminum alloy diffusion orifice, etc. It is easy to install, reliable in sealing, and the filter can be easily replaced. The connection method can be top-connected or side-connected.

 

High-efficiency air outlet series II: divided into ultra-thin type and thin type. All are one-time tuyere, easy to replace (just remove the pipe clamp of the soft joint between the air supply pipe and the tuyere). This series is especially suitable for purifying air conditioning systems with limited ceiling space. Main advantages: simple and reliable box structure, strong ventilation, uniform air supply, convenient installation and simple maintenance.

 

1). The box body is made of cold-rolled steel plate, the outer surface is electrostatically sprayed, and equipped with a diffuser.

2). The structure is compact and airtight. The air inlet methods include side air inlet and top air inlet, and the flange mouth has two structures of square and round.

3). Sometimes the clean room is limited by the height of the civil construction or must adopt a compact design, the integrated high-efficiency filter air outlet can be selected.

4). There are insulation layers and stainless steel materials to choose from.

 

FFU high-efficiency air outlet

 

4. Precautions For The Installation of The FFU High-efficiency Air Outlet

 

1). The first important point before installation is that the size and efficiency requirements of the high-efficiency air outlet must meet the clean room site design requirements and customer application standards.

 

2). Before installing the high-efficiency air outlet, it is necessary to clean the product and clean the clean room. For example, to purify the dust in the air-conditioning system, it should be cleaned and removed, and it must meet the cleaning requirements. Clean and re-purify the air-conditioning system must run continuously for more than 12 hours, and then clean it again.

 

3). The safe transportation of the high-efficiency air outlet should be placed in strict accordance with the manufacturer's signs and directions. During the transportation process, it should be handled with care and avoid severe vibration and collision.

 

4). Before installing the high-efficiency air outlet, it is necessary to conduct a visual inspection of the air outlet packaging on site, including whether the filter paper, sealant and frame are damaged; whether the side length, diagonal and thickness dimensions meet the requirements; whether the frame has burrs and rust spots (metal frame); whether there is a product certificate, and whether the technical performance meets the design requirements.

 

5). Carry out high-efficiency air supply leak detection, check and check whether the leak is qualified, and reasonably allocate according to the resistance of each air supply outlet during installation. For unidirectional flow, the same air outlet or between the filters on the air supply surface , the difference between the rated resistance of each unit and the average resistance of each unit should be less than 5%. High-efficiency air outlets with cleanliness levels equal to and higher than class 100 cleanrooms.

 

6). In the clean room, the joints between the flanging of the air outlet and the ceiling board need to be installed with high-efficiency air outlets, and the joints between the ceiling panels should be treated with gaskets. Remember that the places with cracks must be treated strictly. Do not install the high-efficiency air outlet with damaged or damaged coating. The installation of the air outlet and the air duct must be strictly connected, and the open end should be reinforced with plastic film and tape for airtight treatment. We must carefully observe the above seven precautions. There is a slight error, which directly affects the cleanliness standard of the entire clean room. Friendly reminder; enterprises need to choose a purification equipment manufacturer with the design, production and installation strength of the entire product.

 

FFU high-efficiency air outlet

 

5. The Product Details of The FFU High-efficiency Air Outlet

 

FFU high-efficiency air outlet

 FFU high-efficiency air outlet

 

FFU high-efficiency air outlet

 

FFU high-efficiency air outlet

 

6. The Application of The FFU High-efficiency Air Outlet

 

FFU high-efficiency air outlet

 

7. The Purchase Notes of The FFU High-efficiency Air Outlet

 

▲Invoice Description

The price of this shop does not include tax points, and additional tax points are required for billing. For details, please consult customer service.

 

▲ Shipping Instructions

The goods in this store are all large-volume goods, and the freight varies greatly in different regions. The goods do not include freight and wooden frame packaging costs. The actual freight is calculated according to the product volume, quantity, wooden frame (export wooden box) packaging, and delivery address. Before shooting, you must contact customer service to calculate the freight! In order to avoid unnecessary misunderstandings, directly photographed and not shipped, need to make up the freight and wooden packaging costs before delivery.

 

▲Signing instructions

In order to protect your purchase rights and provide you with high-quality services, you need to be the logistics personnel when you sign for the package. Help you to solve the problem properly and quickly (if there is no inspection and receipt, the store will not be responsible for any damage, small pieces and other reasons to return).

 

8.The Introduction of Dong Guan Zhuo Wei Air Purification Technology Co., Ltd.

 

FFU high-efficiency air outlet

Zhuo Wei Air Purification factory is a company specializing in the production of FFU high-efficiency air outlet supplier, manufacturer, OEM, Zhuo Wei Air Purification factory is a professional advanced durable easy-maintainable FFU high-efficiency air outlet Supplier, manufacturer, and manufacturer. Our Free Sample FFU high-efficiency air outlet supports wholesale customization, free samples are provided, low prices, large quantities and more discounts. This is the latest product. Classy, fancy FFU high-efficiency air outlet is of good quality and durable, made in China. We also provide a product price list, please contact us to learn more. Welcome new and old customers to contact us to discuss cooperation, thank you.

 

9. FAQ:

 

Q1: What is you minimum order quantities?

A :Our MOQ is one set which can meet your sample requirement.

 

Q2: What is your leading time.

A :It’s based on your quantities and the sizes of the products.Generally it takes us 20 days for one container and 10 days for sample orders.

 

Q3: What is your payment terms?

A :30% by T/T as deposit, balance will be payed before delivery.

 

Q4: Do you accept OEM&ODM?

A: Yes

 

Q5: Why maxi?

1). 2 years warranty time guarantee

2). 24 hours to give you prompt and further information

3). Send invitation and arrange everything for you when you come to China

 

Hot tags: China, FFU high-efficiency air outlet, manufacturers, suppliers, factory, Manufacturers, Suppliers, Wholesale, Buy, Factory, Customized, In Stock, Bulk, High Quality, China, Made In China, Cheap, Low Price, Buy discount, Fashion, Newest, Advanced, Classy, Fancy, CE, ISO, Free Sample, Natural, High Dense, New Style, Beauty, Thick

FFU high-efficiency air outlet suppliers

FFU high-efficiency air outlet manufacturers

Send Inquiry

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Verify Code